红外卫星云图和相关向量机的有眼热带气旋客观定强模型   总被引：1，自引：1，他引：0  

戴李杰  张长江  薛利成  马雷鸣  鲁小琴 《遥感学报》2018,22(4):581-590

热带气旋TC(Tropical Cyclone)是全球影响最严重的自然灾害之一。TC强度和路径的准确预报,对于减轻其带来的灾害影响至关重要。本文基于静止红外卫星云图和相关向量机RVM(Relevance Vector Machine)构建有眼TC客观定强模型。首先,利用高斯平滑对红外卫星云图进行去噪;然后,利用基于测地活动轮廓GAC(Geodesic Active Contour)模型的偏微分方程PDE(Partial Differential Equation)法对有眼TC的眼壁进行分割,提取眼壁的亮温梯度信息,计算眼壁亮温梯度的最大值及梯度数据不同概率时的均值,从而构造与TC强度密切相关的特征因子;最后,利用RVM构建单特征因子、多特征因子与近地面最大中心风速的客观定强模型,研究不同特征维度对TC客观定强误差的影响。实验结果表明,在单特征因子的模型定强中,95%概率眼壁亮温梯度均值的定强误差最小,相比利用单特征因子所构建的定强模型,多特征因子的模型定强误差更小,即多特征因子中包含更多与TC强度相关的特征信息。在多特征因子的模型定强中,二特征因子优于三特征因子模型,说明应当合理选择特征因子维数,并非越多越好。本文所用RVM模型具有良好的高维非线性处理能力,能对TC强度进行有效估计。  相似文献   

激光测高数据辅助卫星成像几何模型精化处理   总被引：1，自引：1，他引：0  

曹宁  周平  王霞  唐新明  李国元 《遥感学报》2018,22(4):599-610

资源三号02星(ZY-3 02)作为资源三号系列的第2颗卫星,于2016年5月30号成功发射,其主要服务于中国空间基础建设等重大工程,星上搭载了中国首个对地观测试验性激光测高载荷。高程精度作为立体测图的重要指标,达到其精度要求的困难程度远大于平面。在借鉴目前较成熟的卫星影像区域网平差理论的基础上,结合近年来激光测高数据精度的大幅提升以及ZY-3 02星激光测高数据的特点,首次提出了激光测高数据辅助卫星立体影像进行成像几何模型精化处理的通用理论。首先,利用传统的区域网平差算法对所处理影像进行高精度连接点匹配处理,并对其进行无约束的自由网平差处理,获得高精度相对精度及不亚于原始成像几何模型的绝对精度;其次,根据激光测高数据3维坐标和精化后参考影像成像几何模型获取激光数据参考影像坐标;然后,将参考影像坐标通过几何模型映射获取目标影像上待匹配影像坐标,通过连接点匹配算法,对待匹配目标影像坐标进行精化获取高精度像方同名点;最后,以同名点作为高程控制进行区域网平差计算,对影像成像几何模型进一步处理,获取高精度补偿参数。通过湖北、青海两测区的试验,以激光测高数据辅助卫星影像几何模型精化精度可分别达到1.97 m、3.23 m,结果表明本文提出的方法可有效提高卫星立体数据测图精度。  相似文献   

A virtual globe-based time-critical adaptive visualization method for 3D city models     

Wumeng Huang 《International Journal of Digital Earth》2018,11(9):939-955

3D city models, which are important items of content on the virtual globe, are characterized by complicated structures and large amounts of data. These factors make the visualization of 3D city models highly dependent upon the performance of computer hardware. Thus, achieving the efficient rendering of 3D city models using different hardware performance levels represents one of the key problems currently facing researchers. This paper proposes a time-critical adaptive visualization method that first estimates the possible rendering time for each model according to the data structure of the model in addition to the CPU/GPU performance of the computer. It then dynamically adjusts the rendering level for each model based on the results of an estimation of the rendering time to ensure that the final scene can be completed within a given time. To verify the effectiveness and flexibility of this method, it is applied using different computers. The results show that the adaptive visualization method presented in this paper not only can adapt to computers with different levels of performances but also demonstrates an obvious improvement in the time estimation precision, visual effects, and optimization speed relative to existing adaptive visualization methods.  相似文献   

A comparative analysis of the NDVIg and NDVI3g in monitoring vegetation phenology changes in the Northern Hemisphere     

Qing Chang  Wenzhe Jiao  Fengmei Yao 《国际地球制图》2018,33(1):1-20

Phenology is a sensitive and critical feature of vegetation and is a good indicator for climate change studies. The global inventory modelling and mapping studies (GIMMS) normalized difference vegetation index (NDVI) has been the most widely used data source for monitoring of the vegetation dynamics over large geographical areas in the past two decades. With the release of the third version of the NDVI (GIMMS NDVI3g) recently, it is important to compare the NDVI3g data with those of the previous version (NDVIg) to link existing studies with future applications of the NDVI3g in monitoring vegetation phenology. In this study, the three most popular satellite start of vegetation growing season (SOS) extraction methods were used, and the differences between SOSg and SOS3g arising from the methods were explored. The amplitude and the peak values of the NDVI3g are higher than those of the NDVIg curve, which indicated that the SOS derived from the NDVIg (SOSg) was significantly later than that derived from the NDVI3g (SOS3g) based on all the methods, for the whole northern hemisphere. In addition, SOSg and SOS3g both showed an advancing trend during 1982–2006, but that trend was more significant with SOSg than with SOS3g in the results from all three methods. In summary, the difference between SOSg and SOS3g (in the multi-year mean SOS, SOS change slope and the turning point in the time series) varied among the methods and was partly related to latitude. For the multi-year mean SOS, the difference increased with latitude intervals in the low latitudes (0–30°N) and decreased in the mid- and high-latitude intervals. The GIMMS NDVI3g data-sets seemed more sensitive than the GIMMS NDVIg in detecting information about the ground, and the SOS3g data were better correlated both with the in situ observations and the SOS derived from the Moderate Resolution Imaging Spectroradiometer NDVI. For the northern hemisphere, previous satellite measures (SOS derived from GIMMS NDVIg) may have overestimated the advancing trend of the SOS by an average of 0.032 d yr^–1.  相似文献   

Detection and mapping of bracken fern weeds using multispectral remotely sensed data: a review of progress and challenges     

Trylee Nyasha Matongera  Onisimo Mutanga  Timothy Dube  Romano Trent Lottering 《国际地球制图》2018,33(3):209-224

Bracken fern is one of the major invasive plants distributed all over the world currently threatening socio-economic and ecological systems due to its ability to swiftly colonize landscapes. The study aimed at reviewing the progress and challenges in detecting and mapping of bracken fern weeds using different remote sensing techniques. Evidence from literature have revealed that traditional methods such as field surveys and modelling have been insufficient in detecting and mapping the spatial distribution of bracken fern at a regional scale. The applications of medium spatial resolution sensors have been constrained by their limited spatial, spectral and radiometric capabilities in detecting and mapping bracken fern. On the other hand, the availability of most of these data-sets free of charge, large swath width and their high temporal resolution have significantly improved remote sensing of bracken fern. The use of commercial satellite data with high resolution have also proven useful in providing fine spectral and spatial resolution capabilities that are primarily essential to offer precise and reliable data on the spatial distribution of invasive species. However, the application of these data-sets is largely restricted to smaller areas, due to high costs and huge data volumes. Studies on bracken fern classification have extensively adopted traditional classification methods such as supervised maximum likelihood classifier. In studies where traditional methods performed poorly, the combination of soft classifiers such as super resolution analysis and traditional methods of classification have shown an improvement in bracken fern classification. Finally, since high spatial resolution sensors are expensive to acquire and have small swath width, the current study recommends that future research can also consider investigating the utility of the freely available recently launched sensors with a global footprint that has the potential to provide invaluable information for repeated measurement of invasive species over time and space.  相似文献   

Assessing soil salinity using WorldView-2 multispectral images in Timpaki,Crete, Greece   总被引：2，自引：0，他引：2  

D. D. Alexakis  I. N. Daliakopoulos  I. S. Panagea  I. K. Tsanis 《国际地球制图》2018,33(4):321-338

Salinization is one of the major soil degradation threats occurring worldwide. This study evaluates the feasibility of operational surface soil salinity mapping based on state-of-the-art Earth Observation (EO) products captured by sensors on-board WorldView-2 (WV2) and Landsat 8 satellites. The proposed methods are tested in Timpaki, south-central Crete,Greece, where brackish water irrigation puts soil health at risk of soil salinization. In all cases, EO products are calibrated against soil samples collected from bare soil locations. Results indicate a moderate correlation of observed EC_e values with the investigated remote sensing parameters. Regarding sensitivity to saline soil, the yellow band displays higher values. Comparison between methods used in the literature shows that those developed specifically for soil salinity, and especially index S5, perform better. The proposed ‘detection index’ and 3D PCA transformation methodology perform reasonably well in detecting areas with high EC_e values and provide a simple and effective operational alternative for saline topsoil detection and mapping.  相似文献   

导航卫星天线相位中心误差标定方法研究现状及发展趋势   总被引：1，自引：0，他引：1  

刘伟平  郝金明  邓科 《测绘通报》2018,(3):1-8

卫星天线相位中心误差是影响GNSS高精度定位定轨的重要误差源,实用中需要对其精确标定。随着北斗卫星导航系统的建设发展,如何对卫星天线相位中心误差进行更为精确的标定应引起人们的重视。为此,本文首先简要介绍了各卫星导航系统的卫星天线情况,而后系统总结了导航卫星天线相位中心误差标定方法的发展历程和研究现状,指出了未来卫星天线相位中心误差标定方法的发展趋势,相关研究成果对我国北斗卫星天线相位中心误差的标定方法研究具有参考意义。  相似文献   

形态参数下地表采动裂缝三维建模及可视化方法     

戴华阳  王祥  李军  郭俊廷  阎跃观 《测绘通报》2018,(2):148-153

实现对地表采动裂缝的三维建模及可视化能促进裂缝的形状、成因研究,并为开采沉陷监测和生态环境恢复提供科学支持。目前三维建模方法和软件主要面向建筑物、管道、地质体等地物地貌,若直接应用于地表裂缝的建模与表达会存在野外测绘工作量大、形态规律表达不准确、呈现不逼真等问题。本文结合三维地形建模、分形、空间插值等理论,提出了基于几何形态参数的地表裂缝三维建模方法,并利用ArcEngine平台实现了对裂缝的三维可视化;选取甘肃省东峡矿区为试验区,根据裂缝分布与形态预计参数,实现了对区域内裂缝的模拟,并通过与实测数据和高分辨率影像进行对比,验证了该方法能真实逼真呈现裂缝的形态、延伸与细节信息。  相似文献   

徕卡三维激光扫描系统在建筑物精细建模中的应用   总被引：2，自引：0，他引：2  

朱曙光  何宽  周建郑 《测绘通报》2018,(2):154-156

三维激光扫描技术作为一种新的测绘技术手段改变了传统的测量模式,利用三维激光扫描技术可以快速、高效、连续地获取海量的点云数据,通过处理可以快速得到被测目标的三维模型。本文主要结合徕卡Scan Station P40三维激光扫描系统介绍其在复杂建筑物精细建模中的应用,通过对点云数据及建模精度分析,得出了有益的结论。  相似文献   

基于卫星遥感的洞庭湖水体面积变化及与水文的相关性          下载免费PDF全文

黄菊梅  韩沁哲  姚晟  蒋帅  黄海波 《中低纬山地气象》2022,46(1):27-31

该文利用2006-2020年洞庭湖水体遥感面积及水文资料,对洞庭湖水体面积变化特征及其与水文的相关性进行了探讨。结果表明洞庭湖水体面积离散程度较高且变幅大。岳阳市、益阳市、常德市水体面积分别占洞庭湖水体面积的68.62%、25.77%、5.61%。其中位于岳阳市的岳阳县、湘阴县、位于益阳市的沅江市水体面积分别占洞庭湖水体面积的34.89%、17.35%、23.52%。占比越大的县市水体面积与洞庭湖水体面积相关性越大。洞庭湖水体面积与城陵矶水位的相关性高于常德、益阳水位。2010-2020年洞庭湖水体年最大面积显著增大。洞庭湖水体面积与城陵矶水位4阶多项式曲线拟合相关性最优。此外,不同的卫星/仪器、算法、分辨率以及天气条件对洞庭湖水体面积会产生一定的影响,洞庭湖区强降水对洞庭湖水体面积影响较大。  相似文献